The gateway's product table already runs to 1009 ANSMIND and 1010 ANSGW.
The licensing library stopped at 1008, so a real ANSMIND licence could not
be named, deactivated or listed here, while every product name it did not
recognise quietly became product 1009. With 1009 now a real product, that
fallback would mint an ANSMIND trial for a typo.
ANSPRODUCTS gains ANSMIND = 1009 and ANSGW = 1010, and both are added
wherever the product table is spelled out: ActivateTrialLicense,
DeactivateLicense, ActivateLicense, ActivateLicenseWithCustomHWID and
ListLicenses, which now reports an ANSMIND and an ANSGW row like the
gateway does.
Unknown names no longer map to any id. ActivateTrialLicense returns 0, its
existing failure value, instead of generating a key. ListLicenses skips
the row. ActivateLicense and ActivateLicenseWithCustomHWID keep passing
the name through as the registration name: they never assigned an id, the
key's own validation data rejects a name it was not issued for, and the
gateway resolves an unknown product the same way.
The ANSVIS master-licence rule in LicenseVerification is untouched.
Separately, the fallback loops in ANSUtilities, ANSAWSS3 and ANSLLM asked
for product 1008 under the registration name "ANSSRT". The product is
ANSTS, so a genuine ANSTS licence could never satisfy them. Only that
string changes; the loops still stop at 1008.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The package library's Windows branch pointed at vcpkg alone. On a real
Windows build machine the header lives in the ANSLibs tree, so anything
linking this library failed with "Cannot open include file:
'nlohmann/json.hpp'" while the engines compiled fine — they add ANSLibs
to their own include path and never noticed.
Now it is searched for by name, with the ANSLibs tree, vcpkg and the
usual system paths as hints, and the configure says where it found it.
One code path for every platform instead of an assumption per platform.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Whether the model-package key is present was an __has_include test
inside the header, and that test leaves no dependency for the build
system. A key emitted after a build had already compiled the file would
not take effect until someone cleaned, and the resulting engine looks
exactly like one built without a key — which on a release machine means
shipping an engine that silently cannot open a package.
CMake now decides it and says which case it is, so emitting the key and
re-configuring is what installs it, visibly.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A package whose family says "yolo" may hold an end-to-end export. Boxes
took the family from the backend marker, and the marker names the
runtime, not the head — so a fast yolo26 export arrived declared as
plain yolo while its graph emits [1, N, 6] with the NMS inside it.
Decoding that as a [1, 4+nc, N] grid reads coordinates as confidences:
detections everywhere, and nothing that looks like a failure.
OpenModelPackage now reads the first output's dims from the model it has
just decrypted, and corrects the family with the reason in the warning
rather than swapping it silently. It costs nothing there: the bytes are
in hand. The legacy marker is left alone, so anything converting back to
a zip still writes what ANSCORE expects.
A two-class v8 export is [1, 6, 8400] and must not be mistaken for one,
which is why the 6 has to be the last axis with a detection count before
it. Both cases are tested, and the package this Mac exported before the
writer was fixed now reads as yolo10 here too. 46 checks, no failures.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The reader has been able to open packages for a while and has held no
key, so it refused all of them. This is the seam that hands it one.
The base private key is not in this repository and never will be. It is
written by the ceremony (ANSMINDCORE's ansmodel-keys) into a generated
header that is gitignored and produced from the key vault on the machine
that builds a release. ANSModelKeys.h uses that file when it is there
and says "no keys" when it is not, so a developer's checkout builds and
runs with no secret in it: every zip still loads, and a package is
refused with a sentence that says why.
Keys are settled once — what the build carries, plus a developer's
environment — unless a caller sets a keyring outright, which now means
exactly that rather than depending on which call ran first.
Checked with the real keys against the packages ANSMINDCORE's side
produced: a package sealed by a box that holds only the public half
opens here byte for byte, and one signed by the new release key verifies
against the built-in root. If those two products disagreed, a model that
runs in one would not run in the other, which is the failure this format
exists to avoid. 40 checks in the package test, no failures.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A package now carries what its model expects on the input, but every
package written before that does not — and neither does the zip, which
is most of what is in the field. The engine was then left to assume
640x640, which is wrong for a classification export at 224 and for
anything trained at a rectangular size.
The model itself always knows. ANSOnnxShape reads the first input's
shape straight out of the ONNX protobuf, from memory or from a file,
walking the top level and SEEKING past the nodes and the initializers
rather than reading them — the fields it wants sit after all of the
weight on the wire, and a 324 MB model answers in ten milliseconds.
OpenModelPackage uses it only when the manifest is silent, which costs
nothing there because the bytes are already decrypted in hand. An axis
the graph leaves open is reported as zero and a file that cannot be
parsed is a failure: both mean "this model does not say", and the caller
keeps the default it had. Being wrong about an input size would be worse
than being silent about it.
Checked against python-onnx on all 46 models on this machine, static and
dynamic, four-dimensional and not, with no disagreements. The test
writes ONNX graphs byte by byte, with node and initializer ahead of the
input as a real export has them, and packs one into a package whose
manifest says nothing — which is the case this exists for. 40 checks,
no failures.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An engine's model has always been a path to a password-protected zip:
ANSODBase inflates it into a folder, and every engine then picks out
train_last.onnx, classes.names and model_config.json. A .ansmodel
package replaces all four with one sealed file, and this is the part
that turns it back into what the engines already understand.
ANSODBase::LoadModel and ::Initialize now recognise a .ansmodel path and
take a second route: the package is opened with the process keyring, the
model is decrypted into memory, and the classes, task and input geometry
come out of the manifest instead of loose files. Nothing is extracted,
so the unprotected model never touches the disk — which is the reason
the format exists, and it is one function's job to keep.
The engines follow it down. BasicOrtHandler gains a constructor that
takes the bytes rather than a path; it keeps a view of them, not a copy,
because the weights are in RAM either way once a session exists and a
copy would only double what every loaded model costs. The owner of the
plaintext is ANSODBase, which holds it for as long as the engine object
lives — that is what lets the DirectML recovery path rebuild a session
after a driver fault — and wipes it on teardown.
Wired through ANSONNXYOLO (and so the classification facade), ANSONNXOBB,
ANSONNXPOSE, ANSONNXSEG and YOLO12OD. YOLOOD is left alone: it loads
darknet weights and OpenCV DNN graphs, neither of which the writer
produces. A zip still loads exactly as before, on every engine.
Keys come from SetProcessModelKeys, as in ANSMINDCORE, with the same
development fallback from the environment. With none set, a package is
refused with a sentence saying so and every zip still works, so a build
made before the key ceremony runs everything except packages.
The engine layer needs CUDA to compile, so the contract it depends on is
checked where it can be: ANSModelPackage-UnitTest now opens the fixture
ANSMINDCORE wrote through the same glue ANSODBase uses, and covers the
refusal a keyless build gives. 32 checks, no failures.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The second reader. A package is one encrypted file — cleartext header,
sealed manifest, model bytes sealed in chunks — and this opens it: the
content key unwrapped with X25519 against the base key, the header
verified as Ed25519 signed by a release key the root vouches for, the
model decrypted into memory and handed to ANSModelSource, which the
engines already take.
It is a new library rather than code inside the engine layer, and
deliberately free of the heavy dependencies around it: no CUDA, no
OpenCV, no LabVIEW. That is what lets it build and be tested on every
platform, including the ones where the engine layer does not build.
THE TWO IMPLEMENTATIONS MUST AGREE, so this does not merely claim to:
tests/ANSModelPackage-UnitTest/data/interop.ansmodel was written by
ANSMINDCORE's packer, and the test opens it here — manifest, classes and
a chunked payload, byte for byte. A change to either wire format shows
up as this failing. The fixture's keys are derived by published rules,
recorded beside it, so anyone can rebuild it.
The AEAD and the small primitives are copies of ANSMINDCORE's, not
reimplementations, for the same reason. Monocypher 4.0.2 is vendored
here as it is there, including the RFC 8032 pair — its default EdDSA
signs with BLAKE2b and would not interoperate.
Verified by compiling and running the test directly: 19 checks, RFC
8439, RFC 7748 and RFC 8032 vectors, the interop fixture, a round trip,
a flipped bit, an unknown root, a revoked signer, and rubbish bytes.
ANSCORE's own CMake configure fails on this machine for reasons that
predate this change — eight errors with or without it, all missing
dependencies — so the new CMake targets still need a real build box.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
hwinfo::getAllGPUs() is an OpenCL device list -- the prebuilt HWiNFO.lib has no
Win32_VideoController path, only clGetPlatformIDs/clGetDeviceIDs/clGetDeviceInfo.
A machine whose driver never registered an OpenCL ICD therefore reported no GPU
at all, even with a healthy WDDM driver driving the display. Two consequences:
the system-info JSON emitted "GPU":"", and CheckHardwareInformation() silently
fell back to the CPU engine on a box holding a perfectly good CUDA card.
DXGI needs only a WDDM display driver, so it sees the adapter either way.
CheckHardwareInformation() now classifies adapters by PCI vendor id. Exact ids
also retire the substring matching and its "ATI" inside "CORPORATION" workaround.
It falls back to the OpenCL list when DXGI returns nothing.
GetSystemHardwareInformation() keeps its OpenCL loop untouched and merely appends
DXGI adapters that OpenCL did not already report, so the JSON stays byte-identical
-- same keys, order, indices and values -- on any machine that already worked.
Appended entries reuse OpenCL's vendor spelling (OpenClStyleVendor) and read the
driver version from the display-adapter class key, since DXGI exposes neither.
Verified on a dual-adapter box: the GPU node matches the pre-change output
exactly, and forcing the append path yields the same shape with values sourced
from DXGI plus the registry.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The id is built from up to 6 enumerated MACs. On Linux getifaddrs() also
returns virtual interfaces — docker0 and the veth* pairs each container
creates, tun*/wg* from a VPN, br-*/virbr* bridges. Container veths carry
RANDOM MACs and appear/disappear with the containers, so the enumerated set
can differ between calls: the hardware id changes and an activated licence
silently stops matching its machine. Boxes running Docker (the Coder feature)
would hit this routinely.
This matters more on Linux than elsewhere because two of the four id
components are already constant there: the system-UUID slot is a literal and
GetHDDPropertyList is an empty function on non-Windows. The id rests on CPU id
+ MACs, so unstable MACs are most of the instability.
Filter mirrors what the Windows branch already does via WMI (PNPDeviceId LIKE
%PCI% — physical adapters only). The test is /sys/class/net/<name>/device,
the kernel's own record of a hardware-backed interface, so it stays correct as
new virtual-interface flavours appear; a name-prefix denylist is kept only for
environments without /sys. MACs are bucketed during the walk and chosen after
it, so a veth appearing earlier in the list cannot consume a slot and push a
real NIC out.
FAIL-SAFE: if no physical NIC is found, fall back to the unfiltered set. An
empty list would drop all MAC entropy and — with the UUID and disk slots
already constant — leave near-identical ids across different machines.
Windows and macOS/BSD paths are untouched (both #else branches preserve the
existing behaviour exactly). Logic verified against a simulated Docker host:
enp3s0/wlp2s0 accepted; lo, docker0, veth*, br-*, tun0 rejected.
ORDERING: this CHANGES the id on any Linux box that has virtual interfaces, so
it must land BEFORE the first Linux licences are issued — afterwards it would
invalidate them.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
GetCurrentHardwareId sized its bit stream at 125 bits (16 bytes) but
writes 147 (3 version + 9 x 16-bit hashes), so the last two hash slots
overflowed the heap block by 3 bytes on every id computation. The
Windows heap absorbed it silently for years; it SIGSEGVs under macOS
malloc — found when ANSGateway enabled this code on POSIX (fixed there
in ANSGateway 3a34c68/6c3cdfd; this is the upstream port).
Two parts, both id-preserving (only the first 16 bytes feed the base32
encode — verified byte-identical ids before/after in the gateway):
- hwid.cpp: size the stream to the 147 bits actually written.
- BitStream3: bounds-safe byteAt/setByte accessors on every Write/Read,
Attach records the real buffer size, default ctor zero-inits — an
under-sized stream can no longer corrupt the heap, and out-of-range
reads return 0 (identical to the base32 padding zeros the Match path
always read there).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- hwid.cpp: BitStream3 buffer 125 -> 160 bits (writes totalled 147 bits
and overflowed the old allocation; encoded HWID bytes unchanged).
Log component availability (uuid/cpu/mac/hdd) once per distinct HWID,
and warn when WMI yields no components at all.
- Matcher widened only, generation untouched: exact-string match
short-circuits, UUID match accepts any WMI list entry (generator
hashes the last valid one), fuzzy-match point breakdown is logged so
field status-12 rejections are diagnosable.
- ANSLicense.cpp: fix inverted delete condition (!p != NULL) at 6 sites;
detect the shared "empty fingerprint" HWID of WMI-broken PCs and warn
with repair steps; mask activation keys in error strings.
- licensingclient.h: explain SetKey/validation/NTP failures on stderr.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
1. core/ANSLicensingSystem/ANSLicense.h:268 — added default initializers to ModelConfig POD members (inpWidth = 0, inpHeight = 0, etc.). This was the actual bug: CreateANSODHandle declares a local ModelConfig and only sets a few fields, leaving inpWidth/inpHeight as indeterminate stack memory. On your machine that memory consistently held ~80, slipping past the <=0 → 640 guard and driving the ORT session at 80×80 — which crashes YOLOv11's /model.12/Concat because 2·ceil(80/32)=6 ≠ ceil(80/16)=5.
2. modules/ANSODEngine/ANSONNXYOLO.h:75 — ONNXYOLO::setInputShape() now snaps width/height up to the next multiple of 32 (with a 64-pixel floor). Defense in depth: even if a future caller hands in a non-stride-32 size, the FPN concat alignment is preserved.
3. modules/ANSODEngine/ANSONNXYOLO.cpp — two diagnostic additions:
WarmUpEngine bails with a clear log line if the warm-up dims aren't a multiple of 32, instead of letting the model.12 error fire and mask the real cause.
transform() logs the input shape, canvas shape, source size, and dynamic flag once per session in DebugView — so any future shape-mismatch crash points at the offending HxW directly.
Thread-local staging Mat (video_player.cpp:1400-1407) — single biggest win. Eliminates the 12 MB per-call malloc/free cycle.
Contiguous get_buffer2 allocator (video_decoder.cpp:35-102) — keeps the 3 bulk memcpys cache-friendly. Would also enable FAST/zero-copy for resolutions where visible_h % 64 == 0.
SW-decoder thread config (video_decoder.cpp:528-540) — thread_count=0, thread_type=FRAME|SLICE. FRAME is downgraded to SLICE-only by AV_CODEC_FLAG_LOW_DELAY, but decode throughput is sufficient for your input rate.
SetTargetFPS(100) delivery throttle (already there) — caps onVideoFrame post-decode work at 10 FPS. Keeps the caller path warm-cached.
Instrumentation — [MEDIA_DecInit] / [MEDIA_Convert] / [MEDIA_SWDec] / [MEDIA_Timing] / [MEDIA_JpegTiming] — always-on regression detector, zero cost when ANSCORE_DEBUGVIEW=OFF.