# ANSFrame Multi-Resolution Architecture Plan

## Detailed Comparison: Current vs ANSFrame

### Test Configuration
- GPU: RTX 4070 Laptop (8 GB VRAM)
- Cameras: 5 running (3840×2160, 2880×1620, 1920×1080)
- AI Tasks: 12 (subscribing to cameras)
- Engines: 7 TRT engines
- Decode: Software (YUV420P, CPU)
- Frame rate: SetTargetFPS(100) = ~10 FPS per camera
- Baseline: 8.4 hour stable run (ANSLEGION42), 1,048,325 inferences

### Per-Frame Generation (inside GetImage)

| Step | Current | ANSFrame |
|---|---|---|
| Decode YUV420P | ~5ms (CPU) | ~5ms (same) |
| Full res BGR (cvtColor) | ~4-8ms (4K YUV→BGR) | ~4-8ms (same) |
| 640×640 letterbox | Not done here | ~0.8ms (resize YUV planes + cvtColor, done ONCE) |
| 1080p display | Not done (returns 4K) | ~1.5ms (resize YUV planes + cvtColor, done ONCE) |
| **Total GetImage time** | **~4-8ms** | **~6-10ms** (+2ms for 2 extra sizes) |

### Clone & Dispatch to AI (per clone × 12 AI tasks)

| Step | Current (4K clone) | ANSFrame (1080p clone) |
|---|---|---|
| Clone image size | 3840×2160×3 = **24.9 MB** | 1920×1080×3 = **6.2 MB** |
| memcpy time per clone | **3-5ms** | **0.8-1.2ms** |
| 12 clones total size | **299 MB** | **74 MB** |
| 12 clones total time | **36-60ms** | **10-14ms** |

### AI Preprocessing (per AI task)

| Step | Current | ANSFrame |
|---|---|---|
| Receive image | 4K BGR (24.9 MB) | 1080p BGR (6.2 MB) + ANSFrame ref |
| Local clone in engine | 24.9 MB memcpy (~3ms) | 6.2 MB memcpy (~0.8ms) |
| CPU letterbox resize | 4K→640×640 (~2-3ms) | **SKIP** (use ANSFrame.inference, 0ms) |
| BGR→RGB | 640×640 (~0.3ms) | 640×640 (~0.3ms) |
| GPU upload | 1.2 MB (~0.1ms) | 1.2 MB (~0.1ms) |
| **Total preprocess per task** | **~5-6ms** | **~1.2ms** |
| **12 tasks total** | **~60-72ms** | **~14ms** |

### Pipeline Crop Quality (ALPR, Face Recognition)

| Step | Current | ANSFrame |
|---|---|---|
| Detection from | 4K image | 1080p display (detection) → ANSFrame.fullRes (crop) |
| Crop source | Same 4K image | ANSFrame.fullRes (4K original) |
| **Crop quality** | **4K** | **4K** (identical) |

### Total Processing Time Per Frame Cycle

| Phase | Current (4K) | ANSFrame | Savings |
|---|---|---|---|
| GetImage generation | 4-8ms | 6-10ms | -2ms |
| Clone × 12 | 36-60ms | 10-14ms | **+22-46ms** |
| AI preprocess × 12 | 60-72ms | 14ms | **+46-58ms** |
| TRT inference × 12 | 60-600ms | 60-600ms | Same |
| Postprocess × 12 | 12-60ms | 12-60ms | Same |
| **Total CPU overhead** | **112-200ms** | **28-38ms** | **~80-160ms saved** |
| **Total with inference** | **172-800ms** | **88-638ms** | **~80-160ms saved** |

### RAM Usage

| Resource | Current | ANSFrame |
|---|---|---|
| GetImage output (per camera) | 24.9 MB (4K BGR) | 32.3 MB (3 images) |
| Clones in flight (12 tasks) | 12 × 24.9 = **299 MB** | 12 × 6.2 = **74 MB** |
| AI local clone (12 tasks) | 12 × 24.9 = **299 MB** | 12 × 6.2 = **74 MB** |
| ANSFrame shared data | 0 | 32.3 MB (shared, refcounted) |
| **Total RAM per frame cycle** | **~623 MB** | **~213 MB** |
| **Peak RAM (5 cams, 2-3 cycles)** | **~1.2-1.9 GB** | **~0.4-0.6 GB** |

### GPU / VRAM Usage

| Resource | Current | ANSFrame |
|---|---|---|
| VRAM (engines + workspace) | ~5.9 GB | ~5.9 GB (same) |
| GPU upload per inference | 1.2 MB | 1.2 MB (same) |
| PCIe bandwidth | ~300 MB/s | ~300 MB/s (same) |
| SM utilization | 0-34% | 0-34% (same) |

### CPU Usage

| Component | Current | ANSFrame |
|---|---|---|
| SW decode (5 cameras) | ~3-5 cores | ~3-5 cores (same) |
| YUV→BGR generation | ~0.3 cores | ~0.42 cores (+0.12 for extra sizes) |
| CPU resize per AI task | ~1.5 cores | **0 cores (pre-computed)** |
| Clone memcpy | ~2.4 cores | **~0.5 cores** |
| **Total CPU for pipeline** | **~7-9 cores** | **~4-6 cores** |
| **CPU savings** | — | **~3 cores freed** |

### LabVIEW Thread Scheduling Impact

| Factor | Current | ANSFrame |
|---|---|---|
| Data per task dispatch | 24.9 MB | **6.2 MB** (4x less) |
| Memory allocation pressure | 299 MB in flight | **74 MB** (4x less) |
| Cache efficiency | Poor (24.9 MB > L3) | **Better** (6.2 MB closer to L3) |
| **Processing time (LabVIEW)** | **100-500ms** | **70-300ms (~30-40% faster)** |

### Final Summary

| Metric | Current (8h stable) | ANSFrame (projected) | Improvement |
|---|---|---|---|
| Clone time (12 tasks) | 36-60ms | 10-14ms | **3-4x faster** |
| Preprocess (12 tasks) | 60-72ms | 14ms | **4-5x faster** |
| CPU overhead total | 112-200ms | 28-38ms | **4-5x less** |
| RAM usage (frames) | ~1.2-1.9 GB | ~0.4-0.6 GB | **66% less** |
| CPU cores for pipeline | ~7-9 cores | ~4-6 cores | **3 cores freed** |
| VRAM | No change | No change | — |
| Crop quality (ALPR/FR) | 4K | 4K | Same |
| Processing time | 100-500ms | 70-300ms | **~30-40% faster** |
| Code complexity | Simple | Medium | +~500 lines |

---

## Overview

Replace the single-resolution `cv::Mat**` output from `GetImage` with a multi-resolution `ANSFrame` that contains 3 pre-computed images generated from the YUV420P decoded frame. This eliminates redundant resizing across AI tasks and reduces clone/memcpy overhead by 20x.

## Current Flow (Inefficient)

```
Decoder → YUV420P → cvtColor → 4K BGR (25 MB) → GetImage returns 4K
LabVIEW: clone 4K (25 MB × 12 tasks = 300 MB memcpy)
Each AI task: CPU resize 4K → 640×640 (redundant × 12 tasks)
```

## New Flow (Optimized)

```
Decoder → YUV420P → generate 3 images from YUV planes:
  ├─ Full resolution BGR (for crop/pipeline)
  ├─ 640×640 letterbox BGR (for detection inference)
  └─ 1080p BGR (for display, configurable)

GetImage returns ANSFrame (contains refs to all 3 images)
LabVIEW: clone 1080p only (6.2 MB × 12 = 74 MB, was 300 MB)
AI task: uses 640×640 directly (0.1 MB clone, no resize needed)
Pipeline crop: uses full resolution image (no upscaling artifacts)
```

## Performance Comparison

### Resize from YUV420P planes (Option A — RECOMMENDED)

```
4K YUV420P frame (12.4 MB in 3 planes)
  │
  ├─ Full res: cvtColor(Y+U+V → BGR)                    ~4-8ms
  │  Result: 3840×2160 BGR (24.9 MB)
  │
  ├─ 640×640: resize Y(640×360) + U,V(320×180)           ~0.5ms
  │            + pad bottom + cvtColor                    ~0.3ms
  │  Result: 640×640 BGR (1.2 MB)                   Total: ~0.8ms
  │
  └─ 1080p: resize Y(1920×1080) + U,V(960×540)           ~1.0ms
             + cvtColor                                   ~0.5ms
     Result: 1920×1080 BGR (6.2 MB)                 Total: ~1.5ms

Total generation time: ~6-10ms (all 3 images)
```

### Resize from BGR (Option B — slower)

```
4K YUV420P → cvtColor → 4K BGR (24.9 MB)                 ~4-8ms
  │
  ├─ Full res: already done                               ~0ms
  ├─ 640×640: cv::resize(4K BGR → 640×640) + letterbox    ~2-3ms
  └─ 1080p: cv::resize(4K BGR → 1080p)                   ~1-2ms

Total generation time: ~7-13ms (all 3 images)
```

### Recommendation: Option A (resize YUV planes)

Option A is ~30% faster because YUV420P is 1.5 bytes/pixel vs BGR 3 bytes/pixel — half the data to resize. The YUV plane resize produces identical quality because `cvtColor` is applied after resize (same as how GPU NV12 resize works).

## ANSFrame Structure

### Header: `include/ANSFrame.h`

```cpp
#pragma once
#include <opencv2/core/mat.hpp>
#include <atomic>
#include <cstdint>

// ANSFrame holds pre-computed multi-resolution images from a single decoded frame.
// Generated once in avframeYUV420PToCvMat, shared across all AI tasks via registry.
// Eliminates per-task resize and reduces clone size by 20x.
struct ANSFrame {
    // --- Pre-computed images (all BGR, CPU RAM) ---
    cv::Mat fullRes;        // Original resolution (e.g., 3840×2160) — for crop/pipeline
    cv::Mat inference;      // Model input size (e.g., 640×640 letterbox) — for detection
    cv::Mat display;        // Display resolution (e.g., 1920×1080) — for LabVIEW UI

    // --- Metadata ---
    int originalWidth = 0;  // Original frame width before any resize
    int originalHeight = 0; // Original frame height before any resize
    int inferenceWidth = 0; // Inference image width (e.g., 640)
    int inferenceHeight = 0;// Inference image height (e.g., 640)
    float letterboxRatio = 1.0f; // Scale ratio used for letterbox (for coordinate mapping)
    int64_t pts = 0;        // Presentation timestamp

    // --- Configuration (set per camera) ---
    int displayMaxHeight = 1080;  // Configurable display resolution
    int inferenceSize = 640;      // Configurable inference size (default 640)

    // --- Lifecycle ---
    std::atomic<int> refcount{1};
};
```

### Changes to `ANSFrame` Registry

The existing `ANSGpuFrameRegistry` can be extended or a new `ANSFrameRegistry` created to map `cv::Mat*` (the display image pointer) to its parent `ANSFrame`. When LabVIEW clones the display image and sends it to AI, the AI task can look up the parent `ANSFrame` to access the inference or full-res image.

```cpp
// Registry: maps display cv::Mat* → ANSFrame*
class ANSFrameRegistry {
    std::unordered_map<const uchar*, ANSFrame*> m_map;  // key = Mat.data pointer
    std::mutex m_mutex;
public:
    void attach(cv::Mat* displayMat, ANSFrame* frame);
    ANSFrame* lookup(const cv::Mat& mat);  // lookup by data pointer
    void release(cv::Mat* mat);
};
```

## Implementation Steps

### Step 1: Create ANSFrame structure and registry

**Files to create:**
- `include/ANSFrame.h` — ANSFrame struct definition
- `modules/ANSCV/ANSFrameRegistry.h` — Registry mapping display Mat → ANSFrame
- `modules/ANSCV/ANSFrameRegistry.cpp` — Registry implementation

**Key design decisions:**
- ANSFrame is allocated per decoded frame, shared across all clones
- refcount tracks how many clones reference this frame
- When refcount → 0, all 3 images are freed

### Step 2: Generate multi-resolution images in avframeYUV420PToCvMat

**File to modify:** `MediaClient/media/video_player.cpp`

Replace current `avframeYUV420PToCvMat` which returns single BGR with new version that populates ANSFrame with 3 images.

```cpp
ANSFrame* CVideoPlayer::generateANSFrame(const AVFrame* frame) {
    auto* ansFrame = new ANSFrame();
    const int W = frame->width;
    const int H = frame->height;
    ansFrame->originalWidth = W;
    ansFrame->originalHeight = H;

    // --- Resize YUV planes for each resolution ---

    // 1. Full resolution: direct cvtColor (no resize)
    cv::Mat yuv(H * 3/2, W, CV_8UC1);
    // ... copy planes ...
    cv::cvtColor(yuv, ansFrame->fullRes, cv::COLOR_YUV2BGR_I420);

    // 2. Inference size (640×640 letterbox from YUV planes)
    int infSize = ansFrame->inferenceSize;  // default 640
    float r = std::min((float)infSize / W, (float)infSize / H);
    int unpadW = (int)(r * W), unpadH = (int)(r * H);
    ansFrame->letterboxRatio = 1.0f / r;

    // Resize Y plane
    cv::Mat yFull(H, W, CV_8UC1, frame->data[0], frame->linesize[0]);
    cv::Mat yResized;
    cv::resize(yFull, yResized, cv::Size(unpadW, unpadH));

    // Resize U, V planes
    cv::Mat uFull(H/2, W/2, CV_8UC1, frame->data[1], frame->linesize[1]);
    cv::Mat vFull(H/2, W/2, CV_8UC1, frame->data[2], frame->linesize[2]);
    cv::Mat uResized, vResized;
    cv::resize(uFull, uResized, cv::Size(unpadW/2, unpadH/2));
    cv::resize(vFull, vResized, cv::Size(unpadW/2, unpadH/2));

    // Assemble padded I420 buffer
    cv::Mat yuvInf(infSize * 3/2, infSize, CV_8UC1, cv::Scalar(114)); // gray padding
    yResized.copyTo(yuvInf(cv::Rect(0, 0, unpadW, unpadH)));
    // ... copy U, V with padding ...

    cv::cvtColor(yuvInf, ansFrame->inference, cv::COLOR_YUV2BGR_I420);
    ansFrame->inferenceWidth = infSize;
    ansFrame->inferenceHeight = infSize;

    // 3. Display resolution (1080p from YUV planes)
    int dispH = ansFrame->displayMaxHeight;
    float dispScale = (float)dispH / H;
    int dispW = (int)(W * dispScale);

    cv::Mat yDisp, uDisp, vDisp;
    cv::resize(yFull, yDisp, cv::Size(dispW, dispH));
    cv::resize(uFull, uDisp, cv::Size(dispW/2, dispH/2));
    cv::resize(vFull, vDisp, cv::Size(dispW/2, dispH/2));

    cv::Mat yuvDisp(dispH * 3/2, dispW, CV_8UC1);
    // ... assemble I420 ...
    cv::cvtColor(yuvDisp, ansFrame->display, cv::COLOR_YUV2BGR_I420);

    return ansFrame;
}
```

### Step 3: Modify GetImage to return display image + attach ANSFrame

**File to modify:** `modules/ANSCV/ANSRTSP.cpp` (and other ANSCV classes)

```cpp
cv::Mat ANSRTSPClient::GetImage(int& width, int& height, int64_t& pts) {
    // ... existing logic to get frame from player ...

    // GetImage returns the DISPLAY image (1080p)
    // ANSFrame is attached to the Mat via registry
    ANSFrame* frame = _currentANSFrame;
    width = frame->display.cols;
    height = frame->display.rows;
    pts = frame->pts;

    // Register: display Mat's data pointer → ANSFrame
    ANSFrameRegistry::instance().attach(&frame->display, frame);

    return frame->display;  // 1080p, ~6.2 MB (was 25 MB for 4K)
}
```

### Step 4: Modify ANSCV_CloneImage_S to link clone to ANSFrame

**File to modify:** `modules/ANSCV/ANSOpenCV.cpp`

```cpp
int ANSCV_CloneImage_S(cv::Mat** imageIn, cv::Mat** imageOut) {
    *imageOut = anscv_mat_new(**imageIn);  // clone display image (6.2 MB, was 25 MB)

    // Link clone to same ANSFrame (refcount++)
    ANSFrame* frame = ANSFrameRegistry::instance().lookup(**imageIn);
    if (frame) {
        frame->refcount++;
        ANSFrameRegistry::instance().attach(*imageOut, frame);
    }

    return 1;
}
```

### Step 5: Modify engine Preprocess to use ANSFrame inference image

**Files to modify:** All engine Preprocess functions

```cpp
// In ANSRTYOLO::DetectObjects (and all other engines):
std::vector<std::vector<cv::cuda::GpuMat>> ANSRTYOLO::Preprocess(
    const cv::Mat& inputImage, ImageMetadata& outMeta) {

    // Try to get pre-resized inference image from ANSFrame
    ANSFrame* frame = ANSFrameRegistry::instance().lookup(inputImage);

    cv::Mat srcForInference;
    if (frame && !frame->inference.empty() &&
        inputImage.cols <= frame->inferenceWidth) {
        // Use pre-computed 640×640 — ZERO resize needed
        srcForInference = frame->inference;
        outMeta.imgHeight = frame->originalHeight;
        outMeta.imgWidth = frame->originalWidth;
        outMeta.ratio = frame->letterboxRatio;
    } else if (frame && !frame->fullRes.empty() &&
               inputImage.cols > frame->inferenceWidth) {
        // Need larger than inference size — use full resolution
        srcForInference = frame->fullRes;
        // ... resize to model input from full res ...
    } else {
        // Fallback: use input image directly (backward compat)
        srcForInference = inputImage;
    }

    // Convert BGR → RGB
    cv::Mat cpuRGB;
    cv::cvtColor(srcForInference, cpuRGB, cv::COLOR_BGR2RGB);

    // Upload small image to GPU
    cv::cuda::GpuMat gpuResized;
    gpuResized.upload(cpuRGB, stream);
    // ...
}
```

### Step 6: Pipeline crop uses full resolution

```cpp
// In ANSLPR or any pipeline that crops detected objects:
// Instead of cropping from display image (1080p, upscaling artifacts):
ANSFrame* frame = ANSFrameRegistry::instance().lookup(inputImage);
cv::Mat cropSource = (frame && !frame->fullRes.empty())
    ? frame->fullRes     // Full 4K quality for face/plate recognition
    : inputImage;        // Fallback

// Scale bbox from display coords to full-res coords
float scaleX = (float)cropSource.cols / displayImage.cols;
float scaleY = (float)cropSource.rows / displayImage.rows;
cv::Rect fullResBbox(bbox.x * scaleX, bbox.y * scaleY,
                     bbox.width * scaleX, bbox.height * scaleY);
cv::Mat crop = cropSource(fullResBbox).clone();
```

### Step 7: Configuration API

```cpp
// Set inference size (default 640) — before StartRTSP
void SetRTSPInferenceSize(ANSRTSPClient** Handle, int size);  // 640, 320, 1280

// Set display resolution (default 1080) — before StartRTSP
void SetRTSPDisplayResolution(ANSRTSPClient** Handle, int width, int height);

// Check if ANSFrame is available for a cloned image
int HasANSFrame(cv::Mat** image);  // returns 1 if ANSFrame attached

// Get specific resolution from ANSFrame
int GetANSFrameInference(cv::Mat** displayImage, cv::Mat** inferenceImage);
int GetANSFrameFullRes(cv::Mat** displayImage, cv::Mat** fullResImage);
```

## Memory & Performance Impact

### Per-Frame Memory

| Image | Resolution | Size | Before (single 4K) |
|---|---|---|---|
| Full resolution | 3840×2160 | 24.9 MB | 24.9 MB |
| Inference | 640×640 | 1.2 MB | (generated per AI task) |
| Display | 1920×1080 | 6.2 MB | (was part of 4K) |
| **Total per frame** | | **32.3 MB** | **24.9 MB** |

+7.4 MB per frame for pre-computed images, BUT:

### Clone Savings (12 AI tasks)

| | Before | After |
|---|---|---|
| Clone size per task | 24.9 MB | 6.2 MB (display only) |
| 12 clones total | 299 MB | 74 MB |
| Clone time | 36-60ms | 8-12ms |
| Resize per task | 2-3ms × 12 = 24-36ms | 0ms (pre-computed) |
| **Total savings** | | **~250 MB RAM, ~50ms CPU** |

### Generation Time (one-time per frame)

| Step | Time |
|---|---|
| Full res: cvtColor YUV→BGR | ~4-8ms |
| 640×640: resize YUV planes + cvtColor | ~0.8ms |
| 1080p: resize YUV planes + cvtColor | ~1.5ms |
| **Total** | **~6-10ms** |

vs Current: cvtColor 4K = ~4-8ms + resize per task = ~2-3ms × 12 = ~28-44ms total

**Net savings: ~20-35ms per frame cycle across all tasks.**

## Files to Create/Modify

### New files:
1. `include/ANSFrame.h` — ANSFrame struct
2. `modules/ANSCV/ANSFrameRegistry.h` — Registry header
3. `modules/ANSCV/ANSFrameRegistry.cpp` — Registry implementation

### Modified files:
4. `MediaClient/media/video_player.h` — Add generateANSFrame declaration
5. `MediaClient/media/video_player.cpp` — Implement generateANSFrame, modify getImage
6. `modules/ANSCV/ANSRTSP.h` — Add ANSFrame member, SetInferenceSize
7. `modules/ANSCV/ANSRTSP.cpp` — Modify GetImage to return display + attach ANSFrame
8. `modules/ANSCV/ANSOpenCV.cpp` — Modify CloneImage_S to link to ANSFrame
9. `modules/ANSCV/ANSMatRegistry.h` — Optional: integrate ANSFrame into mat registry
10. `modules/ANSODEngine/ANSRTYOLO.cpp` — Use ANSFrame inference image
11. `modules/ANSODEngine/ANSTENSORTRTOD.cpp` — Same
12. `modules/ANSODEngine/ANSTENSORRTPOSE.cpp` — Same
13. `modules/ANSODEngine/ANSTENSORRTSEG.cpp` — Same
14. `modules/ANSODEngine/ANSTENSORRTCL.cpp` — Same
15. `modules/ANSODEngine/ANSYOLOV12RTOD.cpp` — Same
16. `modules/ANSODEngine/ANSYOLOV10RTOD.cpp` — Same
17. `modules/ANSODEngine/SCRFDFaceDetector.cpp` — Same
18. `modules/ANSODEngine/dllmain.cpp` — Set tl_currentANSFrame for pipeline lookup
19. `modules/ANSLPR/ANSLPR_OD.cpp` — Use fullRes for plate crop
20. `modules/ANSFR/ARCFaceRT.cpp` — Use fullRes for face crop
21. `modules/ANSFR/ANSFaceRecognizer.cpp` — Use fullRes for face crop

### Apply to other ANSCV classes:
22. `modules/ANSCV/ANSFLV.h/.cpp` — Same pattern as ANSRTSP
23. `modules/ANSCV/ANSMJPEG.h/.cpp` — Same
24. `modules/ANSCV/ANSRTMP.h/.cpp` — Same
25. `modules/ANSCV/ANSSRT.h/.cpp` — Same

## Clone-to-ANSFrame Mapping (Critical Design)

### The Problem

LabVIEW calls `ANSCV_CloneImage_S` to create a deep copy of the 1080p display image. The clone has a **different `data` pointer** than the original — so a simple pointer lookup won't find the ANSFrame.

```
GetImage returns display Mat:   data = 0xAAAA → registry: 0xAAAA → ANSFrame #1
CloneImage creates deep copy:   data = 0xBBBB → registry: ??? (not registered)
AI task tries lookup(0xBBBB):   NOT FOUND — fallback to slow path
```

### The Solution

Register the clone's `data` pointer to the same ANSFrame during `ANSCV_CloneImage_S`:

```
GetImage:     data = 0xAAAA → registry: 0xAAAA → ANSFrame #1 (refcount=1)
CloneImage:   data = 0xBBBB → registry: 0xBBBB → ANSFrame #1 (refcount=2)
CloneImage:   data = 0xCCCC → registry: 0xCCCC → ANSFrame #1 (refcount=3)
ReleaseImage: remove 0xBBBB → ANSFrame #1 (refcount=2)
ReleaseImage: remove 0xCCCC → ANSFrame #1 (refcount=1)
Next GetImage: remove 0xAAAA → ANSFrame #1 (refcount=0) → FREE all 3 images
```

### Implementation in ANSCV_CloneImage_S (ANSOpenCV.cpp)

```cpp
int ANSCV_CloneImage_S(cv::Mat** imageIn, cv::Mat** imageOut) {
    *imageOut = anscv_mat_new(**imageIn);          // deep copy display (6.2 MB)
    gpu_frame_addref(*imageIn, *imageOut);          // existing: link GpuFrameData
    ANSFrameRegistry::instance().addRef(*imageIn, *imageOut);  // NEW: link ANSFrame
    return 1;
}
```

### Implementation in ANSCV_ReleaseImage_S (ANSOpenCV.cpp)

```cpp
int ANSCV_ReleaseImage_S(cv::Mat** imageIn) {
    ANSFrameRegistry::instance().release(*imageIn);  // NEW: refcount--, free if 0
    anscv_mat_delete(imageIn);                        // existing: free Mat
    return 1;
}
```

### Implementation in ANSFrameRegistry

```cpp
class ANSFrameRegistry {
    std::unordered_map<const uchar*, ANSFrame*> m_map;  // Mat.data → ANSFrame
    std::mutex m_mutex;
public:
    // Register original display Mat → ANSFrame
    void attach(const cv::Mat* mat, ANSFrame* frame) {
        std::lock_guard<std::mutex> lock(m_mutex);
        // Remove old mapping if exists
        auto it = m_map.find(mat->data);
        if (it != m_map.end() && it->second != frame) {
            if (--it->second->refcount <= 0) delete it->second;
        }
        m_map[mat->data] = frame;
    }

    // Link clone to same ANSFrame (called from CloneImage)
    void addRef(const cv::Mat* src, const cv::Mat* dst) {
        std::lock_guard<std::mutex> lock(m_mutex);
        auto it = m_map.find(src->data);
        if (it == m_map.end()) return;
        ANSFrame* frame = it->second;
        frame->refcount++;
        m_map[dst->data] = frame;
    }

    // Lookup by any Mat (original or clone)
    ANSFrame* lookup(const cv::Mat& mat) {
        std::lock_guard<std::mutex> lock(m_mutex);
        auto it = m_map.find(mat.data);
        return (it != m_map.end()) ? it->second : nullptr;
    }

    // Release mapping (called from ReleaseImage)
    void release(const cv::Mat* mat) {
        std::lock_guard<std::mutex> lock(m_mutex);
        auto it = m_map.find(mat->data);
        if (it == m_map.end()) return;
        ANSFrame* frame = it->second;
        m_map.erase(it);
        if (--frame->refcount <= 0) delete frame;
    }
};
```

### Thread Safety

- Registry uses `std::mutex` — same pattern as `ANSGpuFrameRegistry`
- ANSFrame images (fullRes, inference, display) are **immutable after creation** — safe to read from any thread
- Only `refcount` is modified concurrently — uses `std::atomic<int>`
- ANSFrame is freed only when refcount reaches 0 (all clones released)

### Lifecycle Diagram

```
Camera Thread:                    AI Task 1:              AI Task 2:

generateANSFrame()
  → fullRes, inference, display
  → refcount = 1
  → registry: display.data → AF

GetImage returns display

CloneImage(display, &clone1) ─────► clone1
  → registry: clone1.data → AF
  → refcount = 2

CloneImage(display, &clone2) ──────────────────────────► clone2
  → registry: clone2.data → AF
  → refcount = 3

                                  lookup(clone1) → AF
                                  use AF->inference
                                  use AF->fullRes (crop)
                                  ReleaseImage(clone1)
                                  → refcount = 2

                                                          lookup(clone2) → AF
                                                          use AF->inference
                                                          ReleaseImage(clone2)
                                                          → refcount = 1

Next GetImage:
  → new ANSFrame
  → old display.data removed
  → refcount = 0 → FREE old AF
```

## Leak Prevention (Critical)

### Leak Scenarios

| Scenario | What leaks | Size per leak |
|---|---|---|
| LabVIEW forgets to call ReleaseImage | ANSFrame (fullRes + inference + display) | ~32 MB |
| Camera reconnect while clones exist | Old ANSFrame stays alive until clones released | ~32 MB |
| LabVIEW crash/abort | All ANSFrames in registry | ~32 MB × N frames |
| AI task throws exception, skips Release | ANSFrame refcount never reaches 0 | ~32 MB |

### Protection 1: TTL-Based Auto-Eviction

Same pattern as `ANSGpuFrameRegistry::evictStaleFrames()` — periodically scan for old ANSFrames and force-free them.

```cpp
class ANSFrameRegistry {
    static constexpr int FRAME_TTL_SECONDS = 5;  // Max lifetime of any ANSFrame
    static constexpr int EVICT_INTERVAL_MS = 1000;  // Check every 1 second

    struct Entry {
        ANSFrame* frame;
        std::chrono::steady_clock::time_point createdAt;
    };

    void evictStale() {
        auto now = std::chrono::steady_clock::now();
        // Throttle: only run every EVICT_INTERVAL_MS
        if (now - m_lastEvict < std::chrono::milliseconds(EVICT_INTERVAL_MS)) return;
        m_lastEvict = now;

        std::lock_guard<std::mutex> lock(m_mutex);
        for (auto it = m_frames.begin(); it != m_frames.end(); ) {
            double ageSec = std::chrono::duration<double>(now - it->createdAt).count();
            if (ageSec > FRAME_TTL_SECONDS) {
                // Force-free: remove all Mat* mappings to this frame
                ANSFrame* frame = it->frame;
                for (auto mit = m_map.begin(); mit != m_map.end(); ) {
                    if (mit->second == frame) mit = m_map.erase(mit);
                    else ++mit;
                }
                delete frame;
                it = m_frames.erase(it);
            } else {
                ++it;
            }
        }
    }
};
```

Call `evictStale()` from `GetImage()` (piggybacked on camera thread activity — same as `gpu_frame_evict_stale()`).

### Protection 2: Max ANSFrame Pool Size

Limit total number of live ANSFrames. If pool is full, force-free the oldest before creating a new one.

```cpp
static constexpr int MAX_ANSFRAMES = 100;  // Max live frames across all cameras

ANSFrame* createANSFrame(...) {
    evictStale();  // Clean up expired frames first

    // If still over limit, force-free oldest
    while (m_frames.size() >= MAX_ANSFRAMES) {
        auto oldest = m_frames.begin();
        // ... force-remove all mappings + delete ...
    }

    auto* frame = new ANSFrame();
    // ... populate ...
    m_frames.push_back({frame, std::chrono::steady_clock::now()});
    return frame;
}
```

### Protection 3: Camera-Scoped Cleanup

When a camera is stopped or destroyed, force-free ALL ANSFrames belonging to that camera (regardless of refcount).

```cpp
// In ANSRTSPClient::Stop() and Destroy():
ANSFrameRegistry::instance().releaseByOwner(this);

// In ANSFrameRegistry:
void releaseByOwner(void* owner) {
    std::lock_guard<std::mutex> lock(m_mutex);
    for (auto it = m_frames.begin(); it != m_frames.end(); ) {
        if (it->frame->owner == owner) {
            // Remove all Mat* mappings
            for (auto mit = m_map.begin(); mit != m_map.end(); ) {
                if (mit->second == it->frame) mit = m_map.erase(mit);
                else ++mit;
            }
            delete it->frame;
            it = m_frames.erase(it);
        } else {
            ++it;
        }
    }
}
```

### Protection 4: One ANSFrame Per Camera (Ring Buffer)

Each camera keeps only the **latest** ANSFrame. When a new frame arrives, the previous ANSFrame is marked for cleanup (refcount decremented). This bounds memory to 1 ANSFrame per camera.

```cpp
class ANSRTSPClient {
    ANSFrame* _currentANSFrame = nullptr;

    void onNewFrame(AVFrame* decoded) {
        ANSFrame* newFrame = generateANSFrame(decoded);
        newFrame->owner = this;

        // Replace old frame — decrement refcount
        if (_currentANSFrame) {
            ANSFrameRegistry::instance().detachOwner(_currentANSFrame);
            // If refcount reaches 0, freed immediately
            // If clones still hold refs, freed when they release
        }
        _currentANSFrame = newFrame;
        ANSFrameRegistry::instance().attach(&newFrame->display, newFrame);
    }
};
```

### Protection 5: ANSFrame Struct with Owner Tracking

```cpp
struct ANSFrame {
    // ... existing fields ...

    // Leak protection
    void* owner = nullptr;          // Camera that created this frame
    std::chrono::steady_clock::time_point createdAt;
    std::atomic<int> refcount{1};

    ~ANSFrame() {
        // Images are cv::Mat — automatically freed by OpenCV refcount
        // No manual cleanup needed for fullRes, inference, display
    }
};
```

### Memory Budget Analysis

With all protections:

| Cameras | Max ANSFrames | Memory (worst case) |
|---|---|---|
| 5 running | 5 current + ~10 in-flight clones | 5 × 32 MB = 160 MB |
| 20 running | 20 current + ~40 in-flight clones | 20 × 32 MB = 640 MB |
| 100 created, 5 running | 5 current + ~10 in-flight | 5 × 32 MB = 160 MB |
| 100 created, 95 stopped | 0 (stopped cameras free ANSFrame) | 0 MB |

**Worst case bounded by:** `running_cameras × 32 MB` — predictable, no growth over time.

### TTL Guarantee

Even if ALL protections fail, the 5-second TTL eviction ensures:
- Maximum leak duration: 5 seconds
- Maximum leaked memory: `cameras × 5 seconds × 10 FPS × 32 MB / frame` — but with ring buffer (1 per camera), it's just `cameras × 32 MB`
- Periodic cleanup on every `GetImage` call ensures no accumulation

## Replacing GpuFrameRegistry

### Current State (wasteful with NV12 disabled)

With `_useNV12FastPath = false` (current default), `GpuFrameRegistry` is never populated — no `gpu_frame_attach` is called. But `gpu_frame_addref`, `gpu_frame_remove`, and `gpu_frame_evict_stale` still run on every clone/release/replace — doing empty lookups that waste CPU cycles.

```
Current code paths that run but do nothing:
  ANSCV_CloneImage_S   → gpu_frame_addref → lookup → NOT FOUND → no-op
  ANSCV_ReleaseImage_S → gpu_frame_remove → lookup → NOT FOUND → no-op
  anscv_mat_replace    → gpu_frame_remove → lookup → NOT FOUND → no-op
  anscv_mat_replace    → gpu_frame_evict_stale → scans empty registry → no-op
```

### Plan: ANSFrameRegistry replaces GpuFrameRegistry

ANSFrameRegistry serves the same purpose (mapping `cv::Mat*` → frame metadata) but without GPU complexity:

| Feature | GpuFrameRegistry | ANSFrameRegistry |
|---|---|---|
| Maps Mat* to | GpuFrameData (NV12 GPU pointers) | ANSFrame (3 CPU images) |
| Used when | NV12 fast path enabled | Always (SW or HW decode) |
| GPU dependency | CUDA, pool slots, D2D copy | None |
| Thread safety | mutex + atomic refcount | mutex + atomic refcount |
| Cleanup | TTL eviction + pool cooldown | TTL eviction (simpler) |

### Migration Path

1. **Phase 1 (implement ANSFrame):** ANSFrameRegistry runs alongside GpuFrameRegistry
   - `CloneImage`: calls both `gpu_frame_addref` + `ansframe_addref`
   - `ReleaseImage`: calls both `gpu_frame_remove` + `ansframe_release`
   - Safe: both registries handle NOT FOUND gracefully

2. **Phase 2 (NV12 disabled permanently):** Remove GpuFrameRegistry calls
   - Remove `gpu_frame_addref` from `CloneImage`
   - Remove `gpu_frame_remove` from `ReleaseImage` and `anscv_mat_replace`
   - Remove `gpu_frame_evict_stale` from `anscv_mat_replace`
   - Keep GpuFrameRegistry code for future NV12 re-enablement

3. **Phase 3 (optional, if NV12 re-enabled):** Merge into single registry
   - ANSFrame struct gains optional GPU fields (yPlane, uvPlane, poolSlot)
   - Single registry, single refcount, single lookup

### Recommended: Implement Phase 1 first, Phase 2 after testing

## Backward Compatibility

- If ANSFrame is not available (e.g., old camera module), engines fall back to current behavior (resize input image)
- The `cv::Mat**` API stays the same — LabVIEW doesn't need changes
- ANSFrame is transparent to LabVIEW — it only sees the display image
- The `GetANSFrameInference` / `GetANSFrameFullRes` APIs are optional for advanced use

## Risk Assessment

| Risk | Mitigation |
|---|---|
| Extra 7.4 MB RAM per frame | Negligible vs 250 MB clone savings |
| ANSFrame lifecycle (refcount) | Same pattern as GpuFrameData — proven |
| Coordinate mapping errors | letterboxRatio stored in ANSFrame — deterministic |
| YUV plane resize quality | Same as GPU NV12 resize — proven equivalent |
| Thread safety | ANSFrame is immutable after creation — safe to share |