Commit Graph
15 Commits
Author SHA1 Message Date
nghianguyenandClaude Opus 5 cd99fcf6d9 feat(ANSODEngine): run a sealed model on TensorRT without unsealing it
A .ansmodel reaching the GPU path went to ModelOptimizer, which knows one
way to open a model — unzip it — and failed on the first byte. Even past
that, the TensorRT engine only ever parsed an ONNX file, so the one thing
the format exists to prevent, a decrypted model on disk, was the only way
it could have run.

The builder now takes its bytes from memory when it has them. The path it
is given still names the plan that gets cached beside it, because a plan
is a built artefact and carries no model: the second run loads it and
never needs the ONNX at all. For a package the plan lands in the folder
the zip flow used, so a model converted from a zip reuses the plan that
zip already built.

OptimizeModelStr recognises a package and skips the unzip-and-optimise
leg entirely: the handle below it opens the package in memory and builds
the plan from the decrypted bytes, which is the same work by a shorter
road.

Still on the file path: the other TensorRT handlers (segmentation, pose,
classification). Only the YOLO detector reads a package today.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-13 09:38:45 +10:00
nghianguyenandClaude Opus 4.8 799f755d5a ANSFR: purge stale ServerOptimised zip when engine rebuilds from ONNX
A ServerOptimised zip is a per-GPU cache of a previous engine build. When
the engine profile changes (batch gate, TRT/CUDA upgrade), the cached
engine inside it goes stale: every re-extract (e.g. after Temp cleanup)
restores the old engine and costs a full ONNX rebuild, forever, because
the server only regenerates the zip when the file is missing.

Engine now records rebuiltFromOnnx() + engineFilePath() in
buildLoadNetwork (set only on the generate-from-ONNX branch; cache hits
and alternative-precision loads don't raise it). After a rebuild,
ANSFaceRecognizer::Initialize deletes the stale same-GPU engine variants
from the model folder and the supplied optimised zip, so the server's
next optimize pass recreates it with the fresh engine.

Safety: only zips whose parent folder is ServerOptimised/-ized qualify —
base model zips can never match. Engine purge is scoped to the
"<model>.engine.<GPU>." prefix, leaving other GPUs' engines intact on
multi-GPU machines. All deletes are best-effort (error_code); multi-GPU
pool paths never set the flag, so the purge is a no-op there.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-08-21 11:21:48 +10:00
nghianguyenandClaude Opus 4.8 d2479b9b07 GpuMemoryGuard: scale VRAM safety margin to card size
The margin was a fixed 768 MiB — 3% of a 24 GiB compute card but 19% of
a 4 GiB card (RTX A400), where free VRAM never clears it, so CanLoad()
refused every engine and UnderPressure() skipped every frame. Now
total/8 clamped to [192, 768] MiB: cards >= 6 GiB keep exactly the old
margin, only small cards change. ANSCENTER_GPU_MARGIN_MB / SetMargin()
still override (0 = auto). Refusal log now reports total VRAM alongside
free, which is what made this diagnosable.

Verified on the A400 test PC: detector + recognizer load and match.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-17 13:10:10 +10:00
nghianguyenandClaude Fable 5 13180921c9 Pool dispatch: prefer slot on the GPU where inputs already reside
Two-pass slot acquisition in runInferenceFromPool: Pass A picks an idle
slot whose deviceIndex matches the input GpuMats' resident device
(zero-copy dispatch); Pass B falls back to plain round-robin, where
runInference migrates the inputs via the pinned-host two-hop copy.

Callers that prepare frames on GPU A no longer pay the ~1 ms/frame PCIe
migration when a same-GPU slot is idle, while spillover to the other GPU
under load still works. Input residency is queried outside the slot
mutex via cudaPointerGetAttributes (cheap driver lookup).

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-06 20:05:00 +10:00
nghianguyenandClaude Fable 5 a4ea532f36 Fix multi-GPU inference on Blackwell (dual RTX 5080): four stacked fixes
Verified on dual RTX 5080: 355/355 detections, both GPUs in round-robin,
zero CUDA errors. Requires TensorRT >= 10.16.1 in SharedCore (10.15.1 has
a Myelin l2cm crash when creating a context on a second Blackwell device).

1. blobFromGpuMats: thread_local GpuMat caches (tl_blob/tl_floatImg) were
   device-blind — a pool thread warming GPU[1] then GPU[0] reused device-1
   memory with a device-0 stream, causing an async illegal memory access
   that poisoned every CUDA context (sticky 700). Track owning device and
   rebuild the cache on device switch.

2. runInference: pool round-robin can dispatch to a slot on a different
   GPU than the one the caller prepared inputs on. Detect foreign input
   GpuMats via cudaPointerGetAttributes and migrate them through a pinned
   host staging buffer (two-hop D2H+H2D; direct cross-device cudaMemcpy2D
   is unsupported and GeForce has no P2P).

3. warmUp: now pins its own CUDA device before uploading dummy inputs and
   returns success/failure; loadNetwork rejects engines whose warmup fails
   so broken slots can never join the pool silently.

4. Blackwell builder workaround: setMaxAuxStreams(0) on SM 12.x plus an
   .aux0 engine-cache suffix so pre-workaround caches rebuild.

Also: ANSFR-UnitTest gains --gpu N flag (sets CUDA_VISIBLE_DEVICES) for
single-GPU bisection, and rich diagnostics on input-copy failures.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-06 20:00:19 +10:00
nghianguyen b3436a61ee Prevent OOM 2026-06-18 05:55:31 +10:00
nghianguyen ef2a122fec Add logs to custom models and model optimisation 2026-04-25 13:17:36 +10:00
nghianguyen 57cc8e0a56 Fix double stop in ANSVideoPlayer 2026-04-22 10:10:16 +10:00
nghianguyen 7e772f76bc Improve ANSCV 2026-04-21 09:26:02 +10:00
nghianguyenandClaude Opus 4.6 8d2db78cee Remove [Engine] and [EnginePoolManager] debug log messages
Cleaned up verbose engine telemetry emitted to stdout/stderr and the
Windows Event Viewer. Removes logEngineEvent/logEvent calls (and their
diagnostic-only locals) across the TensorRT engine load, build, run,
multi-GPU, and pool-manager paths, plus the now-unused logEvent helper
in EnginePoolManager.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-16 18:09:08 +10:00
nghianguyen 98681f4da6 Use CPU resize before upload to GPU to remove PCIe bottleneck 2026-04-04 22:29:08 +11:00
nghianguyen e134ebdf15 Use software decoder by default 2026-04-04 20:19:54 +11:00
nghianguyen 958cab6ae3 Fix NV12 crash issue when recreate camera object 2026-04-02 22:07:27 +11:00
nghianguyen 01eabf76bd Fix ANSOCR TensorRT Release 2026-03-30 09:24:04 +11:00
nghianguyen 7b4134133c Initial setup for CLion 2026-03-28 16:54:11 +11:00